2024.12.05

MediaTek MT6735 LTE Smartphone Application Processor Datasheet

The MediaTek MT6735 chip integrates Bluetooth, FM, WLAN and GPS modules and is a highly integrated baseband platform that combines a modem and application processing subsystem to support LTE smartphone applications. The chip integrates a quad-core ARM® Cortex-A53 running at up to 1.3GHz, an ARM® Cortex-R4MCU, and a powerful multi-standard video codec. On-screen display and MMC/SD card. The application processor is a quad-core ARM®Cortex-A53 MPCoreTM with a NEON engine, which provides the processing power needed to support the latest OpenOS and its demanding applications such as web browsing, email, GPS navigation, and gaming. All of this is viewed on a high-resolution touchscreen display, and the graphics are enhanced with 2D and 3D graphics acceleration.
1.jpg

Key features: - Quad-core ARM® Cortex-A53 MPCoreTM running at 1.3GHz -LPDDR3 up to 3GB, 640MHz -LTE Cat 4 (150Mnps) -CDMA200 HEPD/1xEV-DO revisions 0 and A. Embedded connectivity systems, including WLAN/BT/FM/GPS -Resolution up to HD (1,280*720) - OpenGL ES 3.0 3D graphics accelerator ISP support 13MP@30fps. -H.264 1080p@30fps encoder - Voice codecs (FR, HR, EFR, AMR FR, AMR HR, and wideband AMR) Peculiarity: 1. AP MCU subsystem - Quad-core ARM® 1.3Ghz Cortex-A53 MPCoreTM - NEON multimedia processing engine with SIMDv2/VFPv4 ISA support - 32KB L1 I-cache and 32KB L1 D-cache - 512KB Unified L2 Cache - DVFS technology with adaptive operating voltages from 0.85V to 1.25V 2. External memory interface - LPDDR2/3 up to 3GB - Single channel with 32-bit data bus width - Memory clock up to 640MHz - Self-refresh/partially self-refresh mode - Low-power operation - Programmable slew rate for memory controller IO pads - Dual column storage devices - Advanced bandwidth quorum control 3. Peripherals - USB2.0 HS/FS support - eMMC5.1 - 4 UART for debugging and application - The SPI host of the external device - 4 I2C controls peripherals such as CMOS image sensors, LCM or FM receiver modules -Utmost. 5 PWM channels (depending on system configuration/IO usage) - I2S for connecting an optional external high-end audio codec - GPIO - 3 sets of memory card controllers supporting SD/SDHC/MS/MSPRO/MMC and SDIO2.0/3.0 protocols