The MediaTek MT6893 (Dimensity 1200) 5G processor is a highly integrated baseband platform that integrates Bluetooth, FM, WLAN and GPS modules, combines modem and application processing subsystems to support LTE/LTE-A/NR and C2K smartphone applications. The application processors are multi-core ARM®Cortex-A78, ARM®Cortex-A55 with NEON engine, which provides the processing power needed to support the latest OpenOS and its demanding applications such as web browsing, email, GPS navigation, and gaming. All of this is viewed on a high-resolution touchscreen display, and the graphics are enhanced with 2D and 3D graphics acceleration. Multi-standard video accelerators and advanced audio subsystems are also integrated to provide advanced multimedia applications and services such as streaming audio and video, a large number of decoders and encoders.


MT6893 Processor Features: 1. AP MCU subsystem - 4 ARM®Cortex-A78 cores, each with 64KB L1I-cache, 64KB L1D-cache, and 256KB L2 cache. One turbo core operates at up to 3.0GHz, and three cores operate at up to 2.6GHz. - 4 ARM®2.0GHz Cortex-A55 cores, each with 32KB L1I-cache, 32KB L1D-cache, and 128KB L2 cache - Shared 2MB L3 cache - NEON multimedia processing engine with SIMDv2/VFPv4ISA support -DVFS technology, adaptive working voltage from 0.6V to 1.0V 2. Programmable Vision Processor Unit (VPU) supporting AI and CV - Best Performance: Fix8: Up to 639GMAC; Fix16: up to 160 GMAC; FP16: Up to 80 GMAC, FP32: Up to 40 GMAC - Dual-core supports multiple applications at the same time - vFPU supports applications that require high accuracy 3. External memory interface - LPDDR4X up to 16GB (4 lanes, 16-bit data bus width) - Memory data rates up to LPDDR4X-4266 - Self-refresh/partially self-refresh mode - Low-power operation - Programmable slew rate for memory controller I/O pads - Dual column storage devices - Advanced bandwidth quorum control 4. Peripherals - USB1 port, support USB 3.0 device mode or USB 2.0 OTG mode -eMMC5.1 -UFS3.1 - 2 UARTs for debugging and application - 8 SPI hosts for external devices -4 I2Cs/6 I3Cs to control peripherals such as CMOS image sensors, LCM or FM receiver modules. 5. Display - Portrait panel resolution up to QHD+21:9 (1,440×3,360) and frame rate up to 90Hz - Supports 1,440×3,360@90Hz panels and 1,080×2,520@144 Hz panels - DisplayPort 1.4 - MIPI DSI interface (8 data lanes) - MiraVisionTM for image quality enhancement - Embedded LCD gamma correction - True colors - 8 overlays with per-pixel alpha channels and gamma tables - Spatial and temporal jitter - Side-by-side format output to stereoscopic 3D panels in portrait and landscape mode - Color enhancement - Adaptive contrast enhancement - Image/video/graphic sharpness enhancement - Dynamic backlight scaling - GPU Decoder Support (AFBC) - Hardware wide color gamut (WCG) support Pin Configuration: